Communication Equipment Certification (Phones & Tablets / CPE & MiFi / Cellular Modules) CCC · SRRC · Network Access

What This Line Covers

Typical communication equipment and test scenarios — Communication Equipment: Structure, Antenna and Power Design Decide the Certification Path

Scope covers phones and tablets, CPE and MiFi, wireless data terminals, cellular modules (2G to 5G, NB-IoT, Cat.1, Cat.M, RedCap), wireless fixed-line phones, routers and switches, wireless APs, optical network units (ONU/OLT), PoE and industrial switches, fibre transceivers, and base stations with accessories (RRU, AAU, antennas, repeaters, indoor distribution systems). Multi-standard multi-band combinations, carrier aggregation, dual-SIM multi-mode, Wi-Fi 6/7, PoE power and industrial wide-temperature operation; finished devices and modules coexist, and module customers often need to coordinate filing together with device customers.

What we do: multi-standard RF consistency pre-testing, band pruning and power calibration rectification, network access license filing and carrier onboarding documentation, EMC and safety rectification, and coordinated device-plus-module filing design.

Phones & TabletsCPE & MiFiCellular modulesWireless fixed-line phoneRouters & SwitchesWireless APOptical modem ONU/OLTBase-station accessories

First, the catalogCCC by product categorySimilar products in different forms may fall under different catalogs — household appliances, IT/AV, lighting — and a wrong determination is returned at formal review.

Then, transmissionSRRC looks at the finished deviceAny device containing an active transmitting module needs type approval; an approved module simplifies but does not replace device-level filing.

Finally, accessNetwork access applies to public networksOnly terminals and inter-network equipment connected to the public telecom network require it; purely local-area devices do not need it for every product.

Certification Matrix

Broken down by product form, so you can see at a glance which certificates and test items apply:

Sub-category	Typical products & technical features	Core compliance items	Special & value-added
Mobile terminals	Phones, tablets, CPE; 5G multi-mode multi-band	SRRC; CTA network access license; CCC; SAR; GB 4943.1	Carrier onboarding tests; 5G band specials; international roaming compatibility
Communication modules	Cellular, NB-IoT and RedCap modules	SRRC (scope assessed by module form); CTA (when connecting to the public network independently)	Coordinated module/device filing; band pruning and certification-scope optimisation
Network equipment	Routers, switches, APs, ONUs; Ethernet + optical + Wi-Fi	SRRC；CCC；EMC（GB/T 9254）	Carrier central-procurement qualification tests; PoE and thermal design
Base-station accessories	RRU, AAU, antennas, repeaters, indoor distribution	SRRC type approval; radio frequency use compliance	Base-station special testing; RF consistency and spurious testing

“Core compliance items” are what regulations or industry access require; “special & value-added” items are supplementary work that strengthens competitiveness in tenders, central procurement and channel access. The table shows common cases; in practice each item is verified against the product function list and the current catalog.

The Most Common Pitfalls on This Line

All of these have caused rework in real projects — avoiding them early saves 2–4 weeks:

Pitfall 01Submitted software version differs from the commercial versionNetwork access approval follows the submitted sample; if the market version and the submitted version do not match, a spot check becomes a certificate problem. Align the version freeze point with the filing plan in advance.

Pitfall 02Band combination not locked before design freezeEvery change to carrier aggregation or dual-SIM multi-mode combinations means re-running RF consistency. Freeze the band combination first, then start formal submission.

Pitfall 03Approved module ≠ exempt deviceCiting module data simplifies test items, but the device's antenna, structure and power supply differ, so device-level filing cannot be skipped; when the module and device customers are two different companies, coordination must start even earlier.

Pitfall 04Carrier onboarding documents left until laterOnboarding tests and filing documents can be prepared in parallel; starting only when launch is near will bottleneck your channel schedule.

What Gets Tested — and What We Pre-test

Formal testing takes place at designated laboratories; before submission we run baseline checks in our own RF anechoic chamber and EMC lab, so fixable issues are solved in-house.

RF and spurious emission pre-testing — Pre-test: transmit power, frequency tolerance and spurious curves checked up front

Multi-standard RF consistency: transmitter, receiver, spectrum
Protocol conformance: access, handover, interoperability
EMC (GB/T 9254) and safety GB 4943.1
SAR and OTA (TRP / TIS) verification

Pre-testing is not a formality. In projects on this line, spurious emissions, harmonics and EMC account for most rework, and 3–5 days of baseline testing up front often saves a whole round of laboratory queuing.

Timeline and How We Measure It

Path assessment1–3 business days

We review the datasheet, antenna documents and network topology, then issue a written determination: which certificates are needed and whether units can be combined.

In-house pre-testing3–5 business days

Baseline runs in the anechoic chamber and EMC lab; over-limit items are fixed first, avoiding a queued formal test that gets returned.

Formal submission2–6 weeks

Samples go out per the designated laboratory's schedule; we track progress and rectify non-conforming items.

Filing & issuance2–4 weeks

Document submission, formal review, certificate issuance and marking instructions — each milestone is shared with the project owner.

Overall reference timeline 12–20 weeks, compressible with parallel filing; structural changes or retests extend it accordingly. Fees are quoted item by item according to certification scope and number of models; reference ranges are subject to our written assessment.

Clients and Cases

Representative clients on this line: Wingtech Technology, Fibocom, Unionman Technology. Specific project models and progress are subject to mutual agreement.

Industry benchmarks: Huawei, ZTE, FiberHome, H3C, Ruijie Networks, TP-LINK, Tenda, Tianyi Communication, Gongjin Electronics, CIG, Raisecom, Comba Telecom, Tongyu Communication, Baicells, Quectel, Meig Smart, Neoway, Sunsea AIoT, Gosuncn.

See success cases on this line → All 20 cases

FAQ

What documents are needed for a 5G phone's network access license?

Telecom equipment network access application form, SRRC approval certificate, EMC and safety test reports, ISO system or quality assurance capability statement, device datasheet and RF parameter table. Submit samples running the final commercial software version.

Do pocket Wi-Fi devices like MiFi need all three certificates?

Cellular access to the public network requires CTA; Wi-Fi/BT transmission requires SRRC; CCC is determined as IT equipment. The three can be scheduled in parallel with samples prepared in one go.

Are OTA and TRP / TIS mandatory?

OTA is not a mandatory issuance item, but carriers generally require it for onboarding; we cover it during pre-testing to avoid a second submission at the onboarding stage.

Communication Equipment Certification: SRRC · CTA Network Access · CCC